Stewart i pasted your question into Google and here's the reply..


To recover the lost Air Band, CB, and Marine bands on your Uniden UBC125XLT, you'll need to reset the scanner and then reprogram those specific bands. Here's how:
Resetting the Scanner:
Turn off the scanner.
Press and hold the 2 and 9 buttons simultaneously.
While holding 2 and 9, turn the scanner back on.
The display should briefly show a "Clear" message, indicating the reset.
Reprogramming the Bands:
After the reset, the scanner will be in its default state.
Refer to the user manual for instructions on how to enter specific frequencies for the Air Band, CB, and Marine bands. You can also find helpful videos online.
You will need to manually program each channel within the respective bands.
Important Notes:
Make sure you have the correct frequency information for each band before attempting to program.
The user manual provides detailed instructions for programming different bands and channels.
There are various online resources, including YouTube videos, that can guide you through the programming process.
By following these steps, you should be able to recover the lost bands on your Uniden UBC125XLT and start scanning again.
AgB.