[ Post a Response | DOCKSIDE ]
Re: Mercury Mast Repair?
Another approach - During "the Lockdown" I had to isolate for fourteen months in a much smaller environment than I was used to, and turned to 1/2400 scale. The masts were a major challenge. "Albion Alloys Ltd" make lots of very fine Nickel Silver tube. They are available on ebay, and presumably elsewhere. They make sets of slide fit diameters, so you can even make tapered masts with 0.3/0.5/0.7mm tube for example.If you file down the stump, you can use the tube as a sleeve - it works in 1/2400, so 1/1200 should be OK.