Posted by rkc226 on August 9, 2009, 8:00 pm
VIP Member

I have a 2007 mammoth and need a carb kit. It has been idling rough and now won't idle hardly at all. when I went to pull the carb off the nuts were on finger tight the two screws that go in from the bottom were backed out against the intake and would have fallen out if they could have. I tried to just tighten everything up to see if would run right but does not. The air adjust doesn't seem to affect it. Does anyone know if there is a carb kit available?? Thabks for the help in advance. Kent

 Post a Response

Posted by dal800 on August 10, 2009, 10:38 am, in reply to "Carb. kit"
171.159.194.10

I have read on the forum that making a new base gasket from generic gasket material might take care of your issues. From what I have read a part # for that has not been found.

 Post a Response

Posted by rkc226 on August 10, 2009, 1:35 pm, in reply to "Re: Carb. kit"
VIP Member

I found on the Kazuma parts web site they sell a carb gasket set for about 30.00. Just wanted to know if any of you guys new of another solution. Kent

 Post a Response