Posted by jeffdeq The calipers are fixed and the disk pads "float" because the piston should retract far enough for clearance between the pad and rotor. Make sure the caliper is properly centered and also make sure you use some thead lock on the bolts holding the calipers.
on September 8, 2009, 8:58 am, in reply to "fitting brake pads"
VIP Member | Message modified by user jeffdeq September 8, 2009, 9:02 am
I covered this issue in a previous post back in the spring. http://members7.boardhost.com/KazumaMammoth/msg/1237399464.html
Jeff
Camo Mammoth
Message Thread:
« Back to thread