Kazuma Mammoth 800 Information Board and Forum: Re: starter problem

Kazuma Mammoth 800 Information Board and Forum
[ Post a Response | Kazuma Mammoth 800 Information Board and Forum ]

Re: starter problem

Posted by vicj on June 9, 2009, 11:28 pm, in reply to "starter problem"
75.159.90.206

Very easy fix. Pull your clutch cover, remove 2 starter bolts, put aprox 20 thou washers between starter and starter housing. Dont forget to check your clutches and belt. I took my clutches to a local machine shop and had them machined. It has never worked so good!!! I strongly suggest doing this all while you have it apart. WELL WORTH IT!!!

Message Thread:

Machined Clutches Installed - JL242 June 3, 2009, 8:30 pm
- Re: Machined Clutches Installed - penningp June 13, 2009, 4:18 pm
- Re: Machined Clutches Installed - vicj June 5, 2009, 9:57 am
  - Re: Machined Clutches Installed - JL242 June 6, 2009, 9:00 pm
    - starter problem - dog434 June 7, 2009, 5:58 am
      - Re: starter problem - vicj June 9, 2009, 11:28 pm
        
        Re: starter problem - cmsgtsmith June 15, 2009, 11:34 pm
        
        Re: starter problem - MAX June 16, 2009, 9:46 pm
        
        Re: starter problem - cmsgtsmith June 17, 2009, 3:31 pm
        
        Re: starter problem - MAX June 17, 2009, 10:28 pm
« Back to thread