Galaxie Forum Full-size Ford, Lincoln, and Mercury: Spacer plans

[ Post a Response | Galaxie Forum Full-size Ford, Lincoln, and Mercury ]

The Forum has moved to a new location http://galaxieforum.boardhost.com If you are a member of this forum please come to the new location and sign up. The new forum has a lot more options and features and is easier to follow. All the content on this forum will remain here as reference.

Spacer plans

Posted by JEM on August 1, 2012, 10:13 am, in reply to "That would be fantastic!!!! With my clutch being hydraulic...."
198.144.208.110

My intent is to do a 1/8in steel plate with the toothed hole for the Hydroboost, with four holes spaced for the Ford bracket spacing. Then a 2in (or whatever proves to be necessary) thick spacer to space that plate off the firewall.

Trial fitting in my '64 with the 460 indicates that I'll have to invert the Hydroboost for valve-cover clearance.

Responses

I had to clock mine to get it to clear - Daze August 1, 2012, 11:34 am

Lots more room than I've got - JEM August 1, 2012, 3:21 pm

« Back to index

This message is locked.

Responses are not allowed!

Hosted for FREE by Boardhost.
Create your own free message board!