Galaxie Forum Full-size Ford, Lincoln, and Mercury

[ Post New Topic | www.DazeCars.com ]

This forum is for all years of the Ford Galaxie and all other Full-size Ford, Lincoln, and Mercury cars. This is a place to share information, skills, pictures, and stories for the purpose of building friendships and furthering the enjoyment and restoration of these cars.

You are not currently logged in.
Login:	Register To Post Messages
Username:	Password:
Remember me for:

Users active in the last 2 hours: Daze, Rogersgalaxie67, fordgal

Page:

First ... 4 5 6 7 8 9 10

November 7, 2009, 4:41 pm

Bondo, duct tape, and bailing wire. Time to bash the previous owners - Daze November 10, 2008, 9:55 am
- Re: Bondo, duct tape, and bailing wire. Time to bash the previous owners - JCAllison November 10, 2008, 2:04 pm
  - Hey JCA good tip - Daze November 10, 2008, 3:15 pm
    - Re: Hey JCA good tip - JCAllison November 10, 2008, 5:49 pm
      - Now I get it you only come here when the other forum is down :) :) :) - Daze November 10, 2008, 5:55 pm
        
        Re: Now I get it you only come here when the other forum is down :) :) :) - JCAllison November 10, 2008, 6:51 pm
- No one else has previous owner repair stories???? - Daze November 11, 2008, 3:49 pm
  - My previous owner story. - Jay November 11, 2008, 4:11 pm
    - DID SOMEONE SAY BONDO????? - Grimm November 11, 2008, 9:03 pm
  - frame repair? - roger Schroeder November 12, 2008, 3:29 pm
  View all »
I thought my Galaxie was a good find - check this out! - Jay November 10, 2008, 7:34 pm
- I wonder at what point... - Daze November 11, 2008, 11:49 am
  - Re: I wonder at what point... - Grimm November 11, 2008, 12:30 pm
    - Re: I wonder at what point... - Jay November 11, 2008, 1:01 pm
      - Re: I wonder at what point... - Greg B. November 11, 2008, 3:46 pm
  View all »
rust removal - Jay November 8, 2008, 7:14 pm
- For starters here is some homework for you - Daze November 8, 2008, 9:09 pm
  - Re: For starters here is some homework for you - Jay November 8, 2008, 9:24 pm
    - keep in mind that some abrasives used for blasting will remove rust... - Daze November 8, 2008, 9:38 pm
      - No soda for me! Probably beads. - Jay November 9, 2008, 5:16 am
  - Daze, Question?? - roger Schroeder November 9, 2008, 6:00 am
    - Re: Daze, Question?? - Jay November 9, 2008, 6:33 am
    - Thats why I love forums!!!!!!! - Daze November 9, 2008, 7:46 pm
      - Re: Thats why I love forums!!!!!!! - roger Schroeder November 10, 2008, 4:53 am
        
        I have seen to many cars held together with Bondo, duct tape, and bailing wire - Daze November 10, 2008, 9:37 am
        
        Re: I have seen to many cars held together with Bondo, duct tape, and bailing wire - roger Schroeder November 10, 2008, 3:59 pm
  View all »
Wiring - Grimm November 8, 2008, 8:16 pm
- To be honest I don't know much about electric chokes as I prefer a manual :) - Daze November 8, 2008, 9:31 pm
  - Re: To be honest I don't know much about electric chokes as I prefer a manual :) - roger Schroeder November 9, 2008, 5:34 am
    - Re: To be honest I don't know much about electric chokes as I prefer a manual :) - Grimm November 9, 2008, 4:44 pm
      - Re: To be honest I don't know much about electric chokes as I prefer a manual :) - roger Schroeder November 9, 2008, 5:44 pm
        
        Any keyed wire should work. An electric choke does.... - Daze November 9, 2008, 7:36 pm
    - Re: To be honest I don't know much about electric chokes as I prefer a manual :) - Daze November 10, 2008, 9:28 am
  - Re: To be honest I don't know much about electric chokes as I prefer a manual :) - Grimm November 9, 2008, 4:42 pm
    - Don't use the resister that came with the coil. - Daze November 9, 2008, 7:39 pm
      - Re: Don't use the resister that came with the coil. - Grimm November 9, 2008, 9:53 pm
  View all »
Projex for this weekend. - Grimm November 7, 2008, 6:25 pm
- Re: Projex for this weekend. - Grimm November 8, 2008, 8:02 pm
  - Looking good - Daze November 8, 2008, 9:35 pm
    - Re: Looking good - Grimm November 9, 2008, 4:29 pm
  View all »
I Added another page to my web. - roger Schroeder November 8, 2008, 5:18 am
- Re: I Added another page to my web. - Daze November 8, 2008, 9:11 pm
  - Re: I Added another page to my web. - roger Schroeder November 9, 2008, 5:22 am
  View all »
My 64' Galaxie restoration progress - Don Ragan November 6, 2008, 7:05 pm
- Nice looking car and man those headers are impressive!!!! - Daze November 6, 2008, 8:33 pm
  - Re: Nice looking car and man those headers are impressive!!!! - Don Ragan November 7, 2008, 8:04 am
    - ya keep us posted. I love seeing the things people are working on... - Daze November 7, 2008, 8:53 am
  View all »
Hope to get me gage cluster back together today - Daze November 4, 2008, 8:16 am
- well here it is - Daze November 5, 2008, 11:23 am
  - Sweet! - roger Schroeder November 5, 2008, 1:53 pm
    - NICE JOB - Mike Walters November 6, 2008, 5:34 am
  View all »
Media blasting - Jay November 3, 2008, 5:36 pm
- Re: Media blasting - bigiron November 3, 2008, 8:03 pm
  - I agree 100% - Daze November 4, 2008, 8:01 am
    - Jay, one more thing ... - bigiron November 4, 2008, 7:03 pm
- Beware of soda blasting - just dropped by November 4, 2008, 10:12 pm
  - Re: Beware of soda blasting - Jay November 5, 2008, 7:41 pm
    - Phosphoric acid is also a good option It too will neutralize the soda... - Daze November 5, 2008, 7:53 pm
  View all »
Got the new electric fan parts for my 62 - Daze November 4, 2008, 8:13 am
- Re: Got the new electric fan parts for my 62 - Grimm November 4, 2008, 12:25 pm
  - Serves me right, I have inspired many to spend there money :) - Daze November 5, 2008, 2:56 pm
  View all »
rear arm bushings. - roger Schroeder October 29, 2008, 7:34 pm
- Glad to here that the intake and carb made you car come alive. - Daze October 30, 2008, 8:07 am
  - Re: Glad to here that the intake and carb made you car come alive. - Grimm October 31, 2008, 6:24 pm
    - Re: Glad to here that the intake and carb made you car come alive. - 70XL November 4, 2008, 3:26 pm
  View all »
The engine is in. Now the fun begins. - Grimm November 2, 2008, 8:24 pm
- That looks great!!!!!!!!! - Daze November 4, 2008, 8:08 am
  - Re: That looks great!!!!!!!!! - Grimm November 4, 2008, 9:49 am
  View all »
hubcaps - Jay November 3, 2008, 5:15 pm
I have everything I need but time - Daze November 1, 2008, 9:16 am
- Re: I have everything I need but time - Grimm November 1, 2008, 11:32 am
  - Re: I have everything I need but time - Daze November 1, 2008, 9:33 pm
    - Re: I have everything I need but time - Grimm November 1, 2008, 10:24 pm
      - really???? I have always herd 1500 RPM for break in n/m - Daze November 2, 2008, 8:09 am
        
        Re: really???? I have always herd 1500 RPM for break in n/m - Grimm November 2, 2008, 8:12 pm
  View all »
Land yacht update. - Grimm November 1, 2008, 10:57 am
- Re: Land yacht update. - Mike Walters November 1, 2008, 5:03 pm
  - Re: Land yacht update. - Grimm November 1, 2008, 11:47 pm
  View all »
Hey Jay did you notice I added your Gal to the slideshow??? - Daze October 28, 2008, 7:31 pm
- Re: Hey Jay did you notice I added your Gal to the slideshow??? - Jay October 29, 2008, 4:58 am
  - As far as I am concerned I like the "in the process" picts as much if not.... - Daze October 30, 2008, 8:01 am
    - Yes, I noticed. Missing person? - Jay October 30, 2008, 10:25 am
  View all »
Muscle Cars - Joe October 30, 2008, 7:44 am
did you get your grille in? - 62STARLIFT October 28, 2008, 4:29 pm
- Still a work in progress :) :) - Daze October 28, 2008, 7:29 pm
  View all »
Jay wants to know what kind of restoration mistakes we have made so lets here them. - Daze October 5, 2008, 1:51 pm
- No one else here has done something to their car that they wish they hadn't??????????? - Daze October 8, 2008, 8:19 am
  - Re: No one else here has done something to their car that they wish they hadn't??????????? - roger Schroeder October 8, 2008, 9:08 am
    - Re: No one else here has done something to their car that they wish they hadn't??????????? - BattlestarGalactic October 8, 2008, 10:47 am
      - I appreciate the humble confessions! I am sure to add to them! - Jay October 9, 2008, 10:59 am
        
        Re: I appreciate the humble confessions! I am sure to add to them! - dmac October 9, 2008, 11:46 am
        
        Re: I appreciate the humble confessions! I am sure to add to them! - roger Schroeder October 12, 2008, 6:10 am
        
        One thing that will keep me from making too many mistakes - Jay October 12, 2008, 8:37 am
        
        Re: One thing that will keep me from making too many mistakes - Tom V October 16, 2008, 10:34 am
        
        too many projects at once...... - jeff hann October 26, 2008, 3:41 am
        
        Your carpet story . . . . - Jay October 26, 2008, 6:24 am
        
        you know it would not take much to have the imput shaft on the MT... - Daze October 26, 2008, 3:55 pm
        
        AT vs MT - Jay October 26, 2008, 4:40 pm
        
        it probably had a shimmy... - Daze October 26, 2008, 8:01 pm
        
        Jeff, I did the same thing! - roger Schroeder October 26, 2008, 7:32 am
  View all »
Carb rebuild recommendations? - Jay October 26, 2008, 3:36 pm
- See my other reply - Daze October 26, 2008, 3:51 pm
  View all »
I made some progress today and it feels great! See the photos - Jay October 25, 2008, 7:56 pm
- Stock manifold + carb + valve covers - Jay October 25, 2008, 8:13 pm
- Valve covers - Jay October 25, 2008, 8:31 pm
- Treasures from the trunk! - Jay October 25, 2008, 8:34 pm
  - Re: Treasures from the trunk! - Richard October 25, 2008, 9:34 pm
    - Wheel covers. - Jay October 25, 2008, 9:53 pm
      - Re: Wheel covers. - Richard October 25, 2008, 10:27 pm
- Two 4v carbs - What do the tags mean? - Jay October 25, 2008, 9:06 pm
  - Can't quite tell from the picture, but the one on the left... - Daze October 25, 2008, 9:30 pm
    - You are right! Amazing! - Jay October 25, 2008, 9:50 pm
      - Answered my own question but I have another one. - Jay October 25, 2008, 10:42 pm
  - Re: Two 4v carbs - What do the tags mean? - Richard October 25, 2008, 10:33 pm
    - C6AF-E carb must have come from my parts car with the 390ci - Jay October 25, 2008, 10:47 pm
      - Wheel covers.... - jeff hann October 26, 2008, 2:08 am
      - Re: C6AF-E carb must have come from my parts car with the 390ci - roger Schroeder October 26, 2008, 7:01 am
        
        Re: C6AF-E carb must have come from my parts car with the 390ci - Jay October 26, 2008, 3:39 pm
        
        Pony carbs is the expert in classic Ford carbs... - Daze October 26, 2008, 3:49 pm
  View all »
web page - roger Schroeder October 24, 2008, 5:16 am
- Re: web page - Jay October 24, 2008, 11:30 am
- I like it!!!!!!!!! - Daze October 25, 2008, 9:19 am
  - Re: I like it!!!!!!!!! - roger Schroeder October 25, 2008, 11:41 am
- BTW I added a link to your page in the "members pages" section... - Daze October 25, 2008, 9:46 am
- Re: web page - Mike Walters October 25, 2008, 7:13 pm
  - Re: web page - roger Schroeder October 26, 2008, 7:27 am
  View all »
opinions on intake setup - roger Schroeder October 8, 2008, 9:24 am
- Re: opinions on intake setup - BattlestarGalactic October 8, 2008, 10:37 am
  - I agree 100% - Daze October 8, 2008, 11:12 am
    - Re: I agree 100% - roger Schroeder October 8, 2008, 12:49 pm
      - Re: I agree 100% - BattlestarGalactic October 8, 2008, 1:13 pm
        
        IMHO if the ignition is stock.... - Daze October 8, 2008, 8:09 pm
        
        may not fit... - jeff hann October 26, 2008, 3:54 am
        
        Re: may not fit... - roger Schroeder October 26, 2008, 6:44 am
  View all »
Carb.cover seal - Mike Walters October 24, 2008, 5:07 am
- Not sure exactly which seal you are having issues with can you post some... - Daze October 24, 2008, 11:08 pm
- Re: Carb.cover seal - roger Schroeder October 25, 2008, 5:18 am
  - Oh ok now I get it :) :) .. - Daze October 25, 2008, 8:53 am
    - Re: Oh ok now I get it :) :) .. - Mike Walters October 25, 2008, 4:34 pm
  View all »
needing replacement inside door panels - steve September 20, 2008, 1:33 pm
- well, if they can't get the glass in on thursday... - Daze September 21, 2008, 9:58 am
  - Re: well, if they can't get the glass in on thursday... - steve September 21, 2008, 10:06 am
    - Re: well, if they can't get the glass in on thursday... - Daze September 21, 2008, 5:18 pm
      - Re: well, if they can't get the glass in on thursday... - Grimm September 21, 2008, 6:41 pm
        
        I was very impressed with the last guy - Daze September 21, 2008, 9:30 pm
- Re: needing replacement inside door panels - Greg B. September 21, 2008, 11:46 am
  - Re: needing replacement inside door panels - steve September 21, 2008, 11:50 am
- need out side quarter panels 1966 ford galaxie - MICHAEL PENNA October 24, 2008, 6:32 pm
  View all »
1966 Galaxie body parts needed - Domenic August 5, 2008, 2:07 pm
- Re: 1966 Galaxie body parts needed - MICHAEL PENNA October 24, 2008, 6:22 pm
  View all »
Need parts? I have a 1966 Gal500 fastback to part out. - Jay Altemus September 22, 2008, 4:07 pm
- Re: Need parts? I have a 1966 Gal500 fastback to part out. - Daze September 22, 2008, 7:29 pm
  - Re: Need parts? I have a 1966 Gal500 fastback to part out. - Jay Altemus September 22, 2008, 7:51 pm
    - A T10 was the main 4-speed in the mid 60s - Daze September 22, 2008, 8:35 pm
- Re: Need parts? I have a 1966 Gal500 fastback to part out. - Domenico September 22, 2008, 11:13 pm
  - Re: Need parts? I have a 1966 Gal500 fastback to part out. - Jay Altemus September 23, 2008, 5:28 am
- Re: Need parts? I have a 1966 Gal500 fastback to part out. - Carl Heitman October 13, 2008, 7:58 am
  - What part exactly? - Jay October 13, 2008, 9:00 am
    - Re: What part exactly? - carl heitman October 23, 2008, 7:10 pm
      - trunk chrome - Jay October 23, 2008, 7:40 pm
  View all »
1964 Galaxie - Gord October 22, 2008, 11:20 am
- Some one here should have a 64 manual to decode that for you. I did some looking... - Daze October 22, 2008, 2:06 pm
  - Re: Some one here should have a 64 manual to decode that for you. I did some looking... - Gord October 22, 2008, 2:11 pm
    - Re: Some one here should have a 64 manual to decode that for you. I did some looking... - Greg B. October 22, 2008, 2:58 pm
- Your VIN is incorrect - Just dropped by October 22, 2008, 4:08 pm
  View all »
Hey Jay, what did you decide to do about your motor??? n/m - Daze October 19, 2008, 6:17 pm
- I will use the . . . . . . - Jay October 19, 2008, 7:49 pm
  - I am glad you are going with the intake, and I am also glad... - Daze October 19, 2008, 8:59 pm
    - engine bay - Jay October 20, 2008, 9:43 am
      - My engine bay has a 302 in it, same outside dimensions as the 289 - Daze October 20, 2008, 11:00 am
      - As promised here is the info on the ones I used - Daze October 20, 2008, 4:14 pm
        
        Other options? - Jay October 20, 2008, 6:35 pm
        
        Looking at the picture I would be worried about making them fit - Daze October 20, 2008, 6:42 pm
      - Re: engine bay - 70XL October 21, 2008, 12:05 pm
        
        Thanks for the post, I learned something new. I new... - Daze October 21, 2008, 5:00 pm
  - For other 289 questions... - Daze October 19, 2008, 10:16 pm
  View all »
352 or 390????? - Mike Walters October 14, 2008, 6:09 pm
- Has the motor been rebuilt???? - Daze October 14, 2008, 7:17 pm
  - Re: Has the motor been rebuilt???? - roger Schroeder October 14, 2008, 7:41 pm
    - Wow even a blind squirrel finds a nut some times :) :) :) - Daze October 14, 2008, 8:07 pm
      - Re: Wow even a blind squirrel finds a nut some times :) :) :) - Mike Walters October 15, 2008, 5:14 am
        
        Re: Wow even a blind squirrel finds a nut some times :) :) :) - JCAllison October 15, 2008, 7:43 am
        
        Re: Wow even a blind squirrel finds a nut some times :) :) :) - Tom V October 16, 2008, 10:12 am
        
        Re: Wow even a blind squirrel finds a nut some times :) :) :) - Mike Walters October 20, 2008, 4:52 pm
  View all »
I love it when the big brown truck comes to my house - Daze October 15, 2008, 7:57 pm
- Re: I love it when the big brown truck comes to my house - Grimm October 15, 2008, 10:20 pm
  - Re: I love it when the big brown truck comes to my house - Richard October 16, 2008, 4:27 pm
    - Those are front. The main reason I bought them is the bumper I put... - Daze October 16, 2008, 7:04 pm
- DITTO - Grimm October 17, 2008, 8:34 am
  - That looks like a great big pile of fun to me!!!!!! I am still weighing.. - Daze October 17, 2008, 10:22 pm
    - Re: That looks like a great big pile of fun to me!!!!!! I am still weighing.. - Mike Walters October 20, 2008, 4:41 pm
  View all »
Single master cylinder to dual master clyinder on my 61 meteor 800 - David Brown October 19, 2008, 7:33 pm
- The answer to your question is 67 Mustang - Daze October 19, 2008, 8:50 pm
  View all »
Blaster 2 Coil?? - Grimm October 18, 2008, 7:48 pm
- I would make a bracket to mount it by the valve cover - Daze October 18, 2008, 8:43 pm
  - Re: I would make a bracket to mount it by the valve cover - Grimm October 18, 2008, 9:23 pm
    - Re: I would make a bracket to mount it by the valve cover - Grimm October 18, 2008, 9:29 pm
      - What if you mounted it some where like this - Daze October 19, 2008, 2:37 pm
        
        Re: What if you mounted it some where like this - Grimm October 19, 2008, 2:50 pm
        
        What creeps you out ??? n/m - Daze October 19, 2008, 3:14 pm
        
        Re: What creeps you out ??? n/m - Grimm October 19, 2008, 3:36 pm
        
        Photo shop, its the best :) :) - Daze October 19, 2008, 4:19 pm
- Re: Blaster 2 Coil?? - roger Schroeder October 19, 2008, 4:18 pm
  - Re: Blaster 2 Coil?? - Grimm October 19, 2008, 4:54 pm
  View all »
Belt driven or electric fan - Grimm October 17, 2008, 11:11 pm
- I know nothing about electric fans in a Galaxie..... - Daze October 18, 2008, 7:16 pm
  - Re: I know nothing about electric fans in a Galaxie..... - Grimm October 18, 2008, 7:43 pm
    - Shroud or no shroud - Grimm October 19, 2008, 3:05 pm
      - The electric fan will move a lot more air through the radiator... - Daze October 19, 2008, 3:22 pm
        
        Re: The electric fan will move a lot more air through the radiator... - Grimm October 19, 2008, 3:35 pm
  View all »
I tend to like modification and customization, but this poor 62 breaks my heart. - Daze October 18, 2008, 9:00 pm
- Re: I tend to like modification and customization, but this poor 62 breaks my heart. - Grimm October 18, 2008, 9:21 pm
- Re: I tend to like modification and customization, but this poor 62 breaks my heart. - Greg B. October 19, 2008, 12:10 am
  View all »
Have I made a serious mistake? - Grimm October 17, 2008, 7:47 pm
- Re: Have I made a serious mistake? - roger Schroeder October 17, 2008, 9:47 pm
  - Re: Have I made a serious mistake? - Grimm October 17, 2008, 10:11 pm
- When I lift a motor I always use 4 of the bolts that hold the intake... - Daze October 17, 2008, 10:18 pm
- Absolutely not - just stopped by October 17, 2008, 10:21 pm
  - Re: Absolutely not - Grimm October 17, 2008, 11:07 pm
- Re: Have I made a serious mistake? - Richard October 18, 2008, 9:14 pm
  View all »
Head gaskets and 2 barrel heads - Jay October 16, 2008, 11:07 am
- heads are not 2-barrel or 4-barrel, either your mechanic does not know... - Daze October 16, 2008, 1:06 pm
  - I thought it sounded a bit unusual. - Jay October 16, 2008, 5:00 pm
    - Based on what you have said so far, I would be looking for a new.... - Daze October 16, 2008, 7:25 pm
      - I think I understand both viewpoints - not that both are right however - Jay October 16, 2008, 9:03 pm
        
        Your analogy is good but missing one key fact - Daze October 16, 2008, 9:57 pm
        
        Headers will be a first priority then. - Jay October 17, 2008, 8:37 am
        
        Correction - Daze October 17, 2008, 12:09 pm
        
        Ford heads. - Greg B. October 17, 2008, 2:06 pm
  View all »
For grins - Roger Schroeder October 16, 2008, 9:00 am
- I will play - Daze October 16, 2008, 10:18 am
  View all »
Heres the beast - Grimm September 29, 2008, 5:35 pm
- I have an opinion on that :) - Daze September 29, 2008, 6:00 pm
  - Re: I have an opinion on that :) - Grimm September 29, 2008, 8:32 pm
    - Here is my experience with MSD - Daze September 30, 2008, 9:56 am
      - Re: Here is my experience with MSD - Grimm September 30, 2008, 3:21 pm
      - Re: Here is my experience with MSD - Tom V October 15, 2008, 11:13 am
        
        Re: Here is my experience with MSD - Grimm October 15, 2008, 10:25 pm
        
        Re: Here is my experience with MSD - Tom V October 16, 2008, 10:02 am
    - Oh BTW when you start working on that Mustang let me know... - Daze September 30, 2008, 10:12 am
      - Re: Oh BTW when you start working on that Mustang let me know... - Grimm September 30, 2008, 3:22 pm
  View all »
Return after being gone for a while - JCAllison October 13, 2008, 4:13 am
- Thanks for the update JCA!!! - Daze October 13, 2008, 11:42 am
  - Re: Thanks for the update JCA!!! - Grimm October 14, 2008, 10:28 pm
    - Re: Thanks for the update JCA!!! - JCAllison October 15, 2008, 4:45 am
  View all »
The Right Tools for the job. **Plus**Not a new topic - just a thank you to Daze and others for - Jay October 14, 2008, 7:47 pm
- I got my trim removal tool and my window crank tool... - Daze October 14, 2008, 8:10 pm
  View all »
1967 Galaxie 428 4 speed/original owner! - Tim O'Connor October 12, 2008, 6:12 pm
- Re: 1967 Galaxie 428 4 speed/original owner! - Pete S. October 12, 2008, 6:21 pm
- Re: 1967 Galaxie 428 4 speed/original owner! - Daze October 12, 2008, 7:59 pm
- Re: 1967 Galaxie 428 4 speed/original owner! - roger Schroeder October 13, 2008, 5:57 am
- Re: 1967 Galaxie 428 4 speed/original owner! - Tom V October 13, 2008, 10:54 am
- Re: 1967 Galaxie 428 4 speed/original owner! - Chuck Brandt October 14, 2008, 4:20 am
  - Chuck, I have really enjoyed reading about "red car" ever sense you... - Daze October 14, 2008, 7:03 pm
  View all »
I just finished - roger Schroeder October 12, 2008, 3:12 pm
- Pictures where are the pictures???? - Daze October 12, 2008, 3:20 pm
  - Re: Pictures where are the pictures???? - roger Schroeder October 12, 2008, 6:06 pm
    - Re: Pictures where are the pictures???? - roger Schroeder October 13, 2008, 7:29 pm
      - Re: Pictures where are the pictures???? - roger Schroeder October 13, 2008, 7:35 pm
      - Almost - Daze October 13, 2008, 7:48 pm
      - Oh, BTW thanks for posting the pictures!!!!! - Daze October 13, 2008, 8:55 pm
  View all »
my 64 galaxie D-i-y rallypack - mika a September 2, 2008, 1:24 pm
- Re: my 64 galaxie D-i-y rallypack - Daze September 2, 2008, 1:41 pm
- Question - just stopped by October 13, 2008, 8:59 am
  - Thats a really good idea, in fact that is what I am doing sort of :) - Daze October 13, 2008, 11:52 am
    - Re: Thats a really good idea, in fact that is what I am doing sort of :) - Greg B. October 13, 2008, 3:42 pm
      - Thats part of the reason that I went to a floor shifter - Daze October 13, 2008, 5:40 pm
  View all »
Cruiseomatic transmission - Jamie August 25, 2008, 4:04 am
- which Cruise-O-Matic do you have??? - Daze August 25, 2008, 8:27 am
  - Re: which Cruise-O-Matic do you have??? - Grimm August 25, 2008, 11:53 am
    - Thats good information. My understanding... - Daze August 25, 2008, 4:07 pm
      - Re: Thats good information. My understanding... - roger Schroeder August 26, 2008, 10:58 pm
        
        That is my understanding as well... - Daze August 27, 2008, 10:32 am
        
        Re: That is my understanding as well... - dmac September 1, 2008, 11:03 am
        
        Re: That is my understanding as well... - Grimm September 22, 2008, 9:44 pm
        
        I am no expert, but seams to me the only access short of pulling... - Daze September 23, 2008, 8:04 am
- Re: Cruiseomatic transmission - just stopped by October 13, 2008, 8:50 am
  View all »
Out with the old clock and in with the non-stock - Daze October 9, 2008, 7:05 pm
- Re: Out with the old clock and in with the non-stock - Grimm October 10, 2008, 9:06 am
  - Re: Out with the old clock and in with the non-stock - Daze October 11, 2008, 6:48 pm
- Re: Out with the old clock and in with the non-stock - just stopped by October 13, 2008, 8:38 am
  View all »
66bird - Mike Walters October 11, 2008, 6:10 am
- Birds of a feather..... - Daze October 11, 2008, 9:38 am
  - Re: Birds of a feather..... - Mike Walters October 11, 2008, 3:41 pm
    - I would use some marvels mystery oil - Daze October 11, 2008, 4:22 pm
      - Re: I would use some marvels mystery oil - Mike Walters October 12, 2008, 4:55 am
        
        Got to learn it some where :) - Daze October 12, 2008, 2:57 pm
  View all »
Fire it up or tear it apart???? - Grimm October 9, 2008, 5:02 pm
- Re: Fire it up or tear it apart???? - roger Schroeder October 9, 2008, 5:27 pm
  - Re: Fire it up or tear it apart???? - 70XL October 10, 2008, 10:44 am
- Drive it!!!!!! - Daze October 9, 2008, 6:53 pm
  - Re: Drive it!!!!!! - Grimm October 10, 2008, 9:04 am
  View all »
The land yacht may come to life sooner!!!!!!! - Grimm October 1, 2008, 11:01 am
- Can the headers be repaired??? - Daze October 1, 2008, 6:52 pm
  - Re: Can the headers be repaired??? - Grimm October 1, 2008, 11:40 pm
    - After the car has been driven.. - Daze October 2, 2008, 9:16 am
      - Do you think this can be fixed? - Grimm October 2, 2008, 8:01 pm
        
        Thats a horse of a different color - Daze October 2, 2008, 8:10 pm
        
        Re: Thats a horse of a different color - Grimm October 3, 2008, 8:08 am
        
        Re: Thats a horse of a different color - Grimm October 3, 2008, 7:20 pm
        
        which one??? I looked at the links and one is from a T-bird... - Daze October 3, 2008, 7:55 pm
        
        Re: which one??? I looked at the links and one is from a T-bird... - Grimm October 3, 2008, 9:22 pm
        
        Re: which one??? I looked at the links and one is from a T-bird... - 70XL October 9, 2008, 12:01 pm
        
        Re: which one??? I looked at the links and one is from a T-bird... - Grimm October 9, 2008, 4:42 pm
        
        repair on manifold - roger Schroeder October 9, 2008, 5:36 pm
        
        I agree 100% - Daze October 9, 2008, 6:47 pm
        
        "I may need to look into this for the Mustang though." NO NO NO NOOOOOOOOOO!!!!!! - Daze October 9, 2008, 6:55 pm
        
        Re: "I may need to look into this for the Mustang though." NO NO NO NOOOOOOOOOO!!!!!! - Grimm October 10, 2008, 9:11 am
  View all »
$535.00 for a windshield, $505.00 for a re-chromed bumper, $335.00 for NOS... - Daze October 8, 2008, 8:17 am
- Re: $535.00 for a windshield, $505.00 for a re-chromed bumper, $335.00 for NOS... - Grimm October 8, 2008, 8:45 am
  - I meant 200.00 but now that I think about it, it is closer to $300... - Daze October 8, 2008, 11:01 am
    - Re: I meant 200.00 but now that I think about it, it is closer to $300... - Grimm October 9, 2008, 10:46 am
      - Re: I meant 200.00 but now that I think about it, it is closer to $300... - 70XL October 9, 2008, 11:50 am
        
        Re: I meant 200.00 but now that I think about it, it is closer to $300... - Grimm October 9, 2008, 4:50 pm
      - The $300.00 is just for the front grill assembly I have put thousands in this car... - Daze October 9, 2008, 6:40 pm
  View all »

Page:

First ... 4 5 6 7 8 9 10

Post New Topic